Denon AVR-1910 manual 36

ENGLISH

Getting

Changing the Input Sources Assigned to the Input Terminals

Started

(Assign)

Default settings are underlined.

Connections

Setting items

Setting contents

Input Assign (HDMI)

HDMI : The

DVD

HDP

TV

SAT/CBL

VCR

DVR

V.AUX

input

Assign input sources to input

connectors.

sources are assigned to the HDMI input terminals as shown below.

Settings

• HDMI1 / HDMI2 / HDMI3 / HDMI4

• None : Do not assign an HDMI input terminal to the currently selected

input source.

Playback

b Upon purchase, the settings of the different input sources are as shown

below.

Input

DVD

HDP

TV

SAT/CBL

VCR

DVR

V.AUX

source

Multi

Default

HDMI1

HDMI2

None

HDMI3

None

HDMI4

None

-

setting

Zone

Remote

• When HDMI is assigned to an input source, the audio signal switches

to HDMI along with the video signal. To use with the digital audio

input connectors assigned, set menu “Input Mode” (vpage 34) to

Control

“Digital”.

• When the AVR-1910 and TV are connected with an HDMI cable, if the

TV is not compatible with HDMI audio signal playback, only the video

Information

signals are output to the monitor.

• The audio signals input from the analog, digital and EXT. IN connectors

are not output to the TV.

NOTE

Troubleshooting

When “HDMI Control” is set to “ON”, HDMI cannot be assigned to “TV”

at the “HDMI” settings (vpage 28).

Input Assign (Digital)

Digital : The

DVD

HDP

TV

SAT/CBL

VCR

DVR

V.AUX

CD

Assign input sources to input

SIRIUS

input sources are assigned to the digital audio input terminals as

connectors.

shown below.

Specifications

• C1 (COAX1) / C2 (COAX2) / O1 (OPT1) / O2 (OPT2)

• None ： Do not assign a digital input terminal to the currently selected

input source.

b Upon purchase, the settings of the different input sources are as shown

below.

Input source

DVD

HDP

TV

SAT/CBL

VCR

Default setting

COAX1

None

OPT1

COAX2

None

Input source

DVR

V.AUX

CD

SIRIUS

Default setting

OPT2

None

None

None

			Making the input settings (Input Setup)
Setting items			Setting contents
Input Assign (Component)
	Component : The	DVD	HDP	TV	SAT/CBL	VCR	DVR	V.AUX
Assign input sources to input	input sources are assigned to the component video input terminals as
connectors.
	shown below.
	● COMP1 (Component video 1 input terminal) / COMP2 (Component
	video 2 input terminal)
	● None : Do not assign the component video input terminals to the currently
	selected input source.

b Upon purchase, the settings of the different input sources are as shown

below.

Input

DVD

HDP

TV

SAT/CBL

VCR

DVR

V.AUX

source

Default

COMP1

None

None

None

None

COMP2

None

setting

iPod Dock

The control dock for iPod can be assigned to the

DVD

SAT/CBL

VCR

Change the input source to

which the control dock for

DVR

V.AUX

CD

input sources.

Assign

: Assign

the

currently selected input source to the Control Dock for

iPod is assigned.

iPod input.

None : Do not assign the currently selected input source to the Control Dock for iPod input.

• With the default settings, the control dock for iPod can be used connected to the VCR (iPod) connector.

•Even if “iPod Dock” is set to “Assign”, if AVR-1910 and control dock for iPod are not connected, the input is used as the normal input source.

	Remote control
33		:	Displaying the menu	: Moves the cursor (Up/Down/Left/Right)	: Decision the setting	: Return to previous menu
	operation buttons		Cancel the menu