Setting items | Setting contents |
|
| ENGLISH | |
| Making detailed settings (Manual Setup) | Getting | |
|
|
| |
Setting items | Setting contents |
| |
Speaker Config.
Select speaker configuration and size.
(bass reproduction capability)
“S.Back” is displayed when the “Amp Assign” setting (vpage 25) is set to “Normal”.
Surround : Set the presence and size of the Surround speakers.
•Large : Use of a large speaker that can adequately play back low frequencies.
•Small : Use of a small speaker that has inadequate playback capacity for low frequencies.
•None : Select when the surround speakers are not connected.
“Large” is not displayed when “Front” is set to “Small”.
S.Back : Set the presence, size and number of surround back speakers.
•Large : Use of a large speaker that can adequately play back low frequencies.
•Small : Use of a small speaker that has inadequate playback capacity for low frequencies.
•None : Select when the surround back speakers are not connected.
•2sp : Use two surround back speakers.
•1sp : Use only one surround back speaker. Surround back audio is output from the surround back L terminal.
• “Large” is not displayed when “Surround” is set to “Small”.
•Even if “S.Back” is set to “Large”, the “S.Back” setting is automatically switched to “Small” if “Surround” is set to “Small”.
Bass Setting |
|
|
| Subwoofer Mode : Select low range signal to be reproduced by |
| Started | ||
Make the settings related to | subwoofer. |
| ||||||
playback | of | low | frequency | • LFE : Add the low frequency signal of the channel for which the speaker |
| |||
| Connections | |||||||
signals (subwoofer and LFE). | size is set to “Small” to the subwoofer signal and output it. |
| ||||||
This can | be | set when | • LFE+Main : Add the low frequency signal of all channels to the subwoofer |
| ||||
signal and output it. |
| |||||||
“Speaker | Config.” | – |
| |||||
• Play music or a movie source and select the mode offering the |
| |||||||
“Subwoofer” | (vpage |
|
| |||||
| Settings | |||||||
25) is set to “Yes”. |
| strongest bass. |
| |||||
|
|
|
|
|
| • Select “LFE+Main” if you want the bass signals to always be |
| |
|
|
|
|
|
| produced from the subwoofer. |
| |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| Playback | |
|
|
|
|
|
| LPF for LFE : Set the upper limit of the low frequency signals output from |
| |
|
|
|
|
|
| the subwoofer. |
| |
|
|
|
|
|
| • 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz |
| |
|
|
|
|
|
|
|
| |
Distance |
|
|
|
| Unit : Set the unit of distance. |
| Multi | |
Set the | distance | from | the | • Feet |
| |||
listening | position | to | the | • Meters | - | |||
| Zone | |||||||
speakers. |
|
|
|
| Step : Set the minimum variable width of the distance. |
| ||
|
|
|
|
|
| |||
Measure the distance from | • 1ft / 0.1ft |
| Remote | |||||
the listening position to the | • 0.1m / 0.01m |
| ||||||
speakers beforehand. |
| • FL (Front L)/ FR (Front R)/ C (Center)/ SW (Subwoofer)/ SL (Surround L)/ |
| |||||
“Front Height” is displayed when the “Amp Assign” setting (vpage
25)is set to “Front Height”.
NOTE
Select “Large” or “Small” not according to the physical size of the speaker but according to the low frequency
reproduction capabilities based on the frequency set at “Crossover Frequency” (vpage 27).
NOTE
Even when the Surround Back Speaker setting is other than “None”, sound may not be emitted from the surround back speaker, depending on the playback source. In this case, “Surround Back” setting other than “OFF” (vpage 45).
Front Height : Set the front height speaker size.
•Large : Use of a large speaker that can adequately play back low frequencies.
•Small : Use of a small speaker that has inadequate playback capacity for low frequencies.
•None : Select when a front height speaker is not connected.
• “Large” is not displayed when “Front” is set to “Small”.
•Even if “Front Height” is set to “Large”, the “Front Height” setting is automatically switched to “Small” if “Front” is set to “Small”.
| SR (Surround R/ SBL (Surr. Back L)/ SBR (Surr. Back R)/ FHL (Front Height L)/ | Control |
| FHR (Front Height R) : Select the speaker you want to set, and set the | |
| distance. Set the value that is closest to the measured distance. | |
| Information | |
| • 0.0ft ~ 60.0ft / 0.00m ~ 18.00m | |
| • The speakers that can be selected differ depending on the “Amp Assign” | |
| (vpage 25) and “Speaker Config.” (vpage 25) settings. | Troubleshooting |
| • Default settings : | |
| Front/Center/Subwoofer/Front Height : 3.6 meters (12 feet) | |
| Surround/Surr. Back : 3.0 meters (10 feet) | |
| NOTE | |
| Set the difference in the distance between the speakers to less than 6.0 | |
| Specifications | |
| meters (20 feet). “Relocate Speaker” is displayed on the screen if an | |
| inappropriate distance is set. | |
| Default : Reset all distance settings to factory default. | |
| • Yes : Reset to the defaults. | |
| • No : Do not reset to the defaults. |
|
Remote control |
|
|
|
|
|
|
| |
| : | Displaying the menu | : Moves the cursor (Up/Down/Left/Right) | : Decision the setting | : Return to previous menu | 26 | ||
operation buttons |
|
| Cancel the menu |
|
|
|
| |
|
|
|
|
|
|
|
|
|