ENGLISH

Getting

 

 

 

 

 

Making the audio settings (Audio Setup)

Started

 

 

 

 

Default settings are underlined.

 

 

 

 

 

 

 

 

 

Connections

Make settings for audio playback.

 

 

 

 

Setting items

 

Setting contents

 

 

 

 

 

EXT.IN SW Level

+15dB : This is the recommended level.

 

 

Set the playback level of the

+10dB / +5dB / 0dB : Select the level according to the player being used.

Settings

 

 

analog subwoofer signals

 

 

 

input from the external input

 

 

 

 

 

 

 

 

terminals (EXT.IN).

 

 

Playback

 

2ch DIRECT/STEREO

Setting : Select the method for setting the speakers used in the 2-channel

Make speaker settings for 2-

direct and stereo playback modes.

 

 

 

 

channel mode playback.

• Basic : The settings at “Speaker Setup” (vpage 25) are applied.

Multi

 

 

• Custom : Make separate settings for 2-channel mode.

 

 

Front : Set the front speaker size.

 

 

•

Large : Use of a large speaker that can adequately play back low

-

 

 

 

 

frequencies.

Zone

 

 

 

 

 

•

Small : Use of a small speaker that has inadequate playback capacity

Remote

 

 

 

for low frequencies.

 

 

SW : Set the presence of a subwoofer.

 

 

 

 

 

 

 

 

• Yes : Use a subwoofer.

Control

 

 

•

No : Select when a subwoofer is not connected.

 

 

• LFE : Add the low frequency signal of the channel for which the speaker

 

 

 

 

SW Mode : Select low range signal to be reproduced by subwoofer.

Information

 

 

 

size is set to “Small” to the subwoofer signal and output it.

 

 

• LFE+Main : Add the low frequency signal of all channels to the

 

 

 

 

 

 

 

 

 

subwoofer signal and output it.

 

 

 

 

Crossover : Outputs at below set frequency, each speaker’s bass signal

 

 

 

 

output from the subwoofer.

Troubleshooting

 

 

• 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz

 

 

CH Level FL/ CH Level FL FR : Select the speaker you want to set, and

 

 

 

 

 

/ 250Hz

 

 

 

 

Distance FL / Distance FR : Select the speaker you want to set, and set

 

 

 

 

the CH Level. Set the value that is closest to the measured distance.

 

 

 

 

•

0.0ft ~ 60.0ft (12.0ft) / 0.00m ~ 18.00m (3.6m)

Specifications

 

 

set the CH Level. Adjust the level of each channel.

 

 

•

–12.0dB ~ +12.0dB(0.0dB)

 

 

 

 

 

 

 

Making detailed settings (Manual Setup)

 

 

Setting items

Setting contents

 

 

Auto Surround Mode

ON : Memorize settings. Most recently stored surround mode is

Make setting for memorizing

automatically selected.

surround mode setting for OFF : Do not memorize settings. Surround mode does not change

each input signal type.

according to input signal.

 

The auto surround mode function lets you store in the memory the

 

surround mode last used for playing the four types of input signals

 

listed below.

 

q Analog and PCM 2-channel signals

 

w Dolby Digital and DTS 2-channel signals

 

e Dolby Digital and DTS multi-channel signals

 

r Multi-channel signals other than Dolby Digital and DTS (PCM, etc.)

NOTE

When playing in the PURE DIRECT mode, the surround mode does not change even if the input signal is changed.

EQ Customize

Audyssey Byp. L/R / Audyssey Flat / Manual

Set so that unused equalizer

• Used

settings

are not displayed

• Not Used

when

is used.

NOTE

 

 

•Set so that the “Audyssey Byp. L/R” and “Audyssey Flat” settings can be made when the Audyssey Auto Setup procedure is performed.

•Equalizer settings for which “Not Used” is set with the Quick Select function cannot be stored and called out.

 

Remote control

 

 

 

 

 

2

 

:

Displaying the menu

: Moves the cursor (Up/Down/Left/Right)

: Decision the setting

: Return to previous menu

 

operation buttons

 

 

Cancel the menu