Denon AVR-1910 manual 42

ENGLISH

Getting		Press	and hold it down for a 2 seconds or more to
Started
	4 select the display mode.
		There are two modes for display the contents recorded on the
Connections		iPod.
		Browse mode ：Displayed on the TV screen.
		Remote mode ：Displayed on the iPod’s screen.
Settings		Display mode		Browse mode	Remote mode
		Playable	Audio file	S	S
Playback		files	Video file	Sz1	Sz2
		Active	Remote control	S	S
			unit (AVR-1910)
		buttons
			iPod®	A	S
-Multi
	z1：When using an ASD-11R, ASD-3N or ASD-3W control dock for
Zone
		iPod.
	z2：Video may not be output, depending on the combination of
Remote		ASD-1R or ASD-11R and iPod.			Front
		Use ui to select the menu, then
Control
	5 press		or pto select the music or
Information		video file to be played.
		Press	or p.
	6 Playback starts.
Troubleshooting	7 Use		to adjust the volume.
		GVariable rangeH – – –		–80.0dB ~ 18.0dB
	※ The variable range differs according to the input signal and channel
		level setting.
Specifications		Select the desired surround mode.
	8 (vpage 42 “Selecting the Surround Mode”)
	9	Adjust the desired sound field effects.
		(vpage 44 “Adjusting the sound Field Effects”)

nTo stop

During playback, either press and hold or press .

nStopping playback temporarily			Front
During playback, press		or .
Press again to resume playback.
nTo cue to the beginning of a track
During playback,	either press (to cue to
the current track) or		(to cue to the next

track).

nRepeat playback and shuffle playback

“iPod Playback Mode” (vpage 35)

•Use the RESTORER mode to expand the low and high frequency components of compressed audio files and achieve a richer sound.

The default setting is “Mode3” (vpage 48).

•To check the name of the title, the artist or the album when playing in browse mode, press

.

• The time (default : 30 sec) for which the on-	Front
screen display are displayed can be set at

menu “iPod Information” (vpage 31). Press uio p to return to the original screen.

• Press and set the AVR-1910’s power to the
standby mode before disconnecting the iPod.	Front
Also switch the input source to one to which
the menu “iPod dock” is not assigned before
disconnecting the iPod.

NOTE

•Depending on the type of iPod and the software version, some functions may not operate.

•DENON will accept no responsibility whatsoever for any loss of iPod data.

Playing Components

Viewing Still Pictures or Videos on the iPod®

•Photo and video data on the iPod can be viewed on the monitor. Only for iPod equipped with slideshow or video functions. (When using an ASD-1R or ASD-11R)

•Video may not be output, depending on the combination of ASD-1R or ASD-11R and iPod.

Press and hold	to set the Remote	Front
1 mode.

“Remote iPod” is displayed on the AVR- 1910’s display.

2WatchingtheiPod’sscreen,useuito select “Photos” or “Videos”.

3 Press until the image you want to view is displayed.

“TV Out” at the iPod’s “Slideshow Settings” or “Video Settings” must be set to “On” in order to display the iPod’s photo data or videos on the monitor. For details, see the iPod’s operating instructions.

iPod is a trademark of Apple Inc., registered in the U.S. and other countries. The iPod may only be used to copy or play contents that are not copyrighted or contents for which copying or playback is legally permitted for your private use as an individual. Be sure to comply with applicable copyright legislation.

Listening to FM/AM Broadcasts

Basic Operation

1	Set	to “MAIN/TV” and	Front
		to “MAIN”.
2Press		to select “TUNER”.	Front

39