Denon AVR-1910 Making detailed settings (Manual Setup)

ENGLISH

Getting	Making detailed settings (Manual Setup)
	video and display settings.
Started
	Use this procedure to change the Audyssey Auto Setup settings or to change the various audio,
Connections	The set can be used without changing these settings. Make these settings as necessary.
	For a description of “Menu map” and operating instructions, see page 18.
	n Items that can be set with the Manual Setup procedure
	Making the speaker settings (Speaker Setup) vpage 25
Settings
Playback	Making the HDMI settings			(HDMI Setup) vpage 28
Zone-Multi	Making the audio settings			(Audio Setup) vpage 29
Remote	Making the ZONE2 settings (ZONE2 Setup) vpage 30
Control	Making other settings (Option Setup) vpage 30
Information	nExamples of Menu Screen Displays
	Speaker Setup		HDMI Setup			Audio Setup
Troubleshooting	4-1.Speaker Setup	4-2.HDMI Setup				4-3.Audio Setup
	7.Front Sp Setup
	1.Amp Assign	Auto Lipsync			: ON	1.EXT.IN SW Level
	2.Speaker Config.	HDMI Audio Out			: Amp	2.2ch Direct/Stereo
	3.Bass Setting	HDMI Control			: OFF	3.Auto Surround Mode
	4.Distance					4.EQ Customize
	5.Channel Level
	6.Crossover Freq.
Specifications	[ENT]:Select [RTN]:Back			[RTN]:Back		[ENT]:Select [RTN]:Back
	ZONE2 Setup				Option Setup
	4-4.ZONE2 Setup			4-5.Option Setup
	Level Lch	:	0dB	1.Volume Control
	Level Rch	:	0dB	2.Source Delete
	Vol.Display	: Relative		3.On-Screen Display
	Vol.limit	: OFF		4.Quick Select Name
	Power On Lev: Last			5.ZONE Rename
	Mute Lev.	: Full		6.Display
				7.Setup Lock
		[RTN]:Back		[ENT]:Select [RTN]:Back

Making the speaker settings (Speaker Setup)

Default settings are underlined.

Use this procedure to set the speakers manually or if you wish to change the settings made with the Audyssey Auto Setup procedure.

	Setting items				Setting contents
Amp Assign					Normal : The surround back channel audio signals are output.
Sets the signal output to the					ZONE2 : The ZONE2 audio signals are output.
speaker		connected		to the	Front A Bi-Amp :The bi-amp audio signals are output. Set this for bi-amp
SURR. BACK/AMP				ASSIGN	playback of the front A speakers.
terminals.					Front B Bi-Amp :The bi-amp audio signals are output. Set this for bi-amp
					playback of the front B speakers.
					Front Height : The front height channel audio signals are output.
Speaker Config.					Front : Set the front speaker size.
Select speaker configuration					• Large : Use of a large speaker that can adequately play back low
and size.					frequencies.
(bass reproduction capability)					• Small : Use of a small speaker that has inadequate playback capacity for
					low frequencies.
					If “Subwoofer” is set to “No”, “Front” is automatically set to “Large”.
					Center : Set the presence and size of the center speaker.
					• Large : Use of a large speaker that can adequately play back low
					frequencies.
					• Small : Use of a small speaker that has inadequate playback capacity for
					low frequencies.
					• None : Select when a center speaker is not connected.
	NOTE				• “Large” is not displayed when “Front” is set to “Small”.
					• Even if “Center” has been set to “Large”, when “Front” is set to
Select “Large” or “Small” not
					“Small”, the “Center” setting automatically switches to “Small”.
according to the physical size
					• Subwoofer : Set the presence of a subwoofer.
of the speaker but according
to	the	low	frequency		• Yes : Use a subwoofer.
reproduction			capabilities		• No : Select when a subwooofer is not connected.
based on the frequency set					When “Front” is set to “Small”, “Subwoofer” can automatically set
at	“Crossover		Frequency”		to “Yes”.
(vpage 27).

See overleaf

	Remote control
2		:	Displaying the menu	: Moves the cursor (Up/Down/Left/Right)	: Decision the setting	: Return to previous menu
	operation buttons		Cancel the menu