Denon AVR-1910 manual 37

ENGLISH

Making the input settings (Input Setup)

Getting

Making the video settings (Video)

Default settings are underlined.

The items that can be set depend on the input source and the “Assign” setting.

Setting items

Setting contents

Video Select

Source : Play the picture and sound of the input source.

Switch

video input

source

DVD / HDP / TV / SAT/CBL / VCR / DVR / V.AUX : Select video input

while

listening to

audio

source to view. This can be set for individual input sources.

signal.

NOTE

• It is not possible to select HDMI input signals.

• When playing HDMI video input signals, the analog video signal of

another input source cannot be selected for the HDMI video output.

• Input sources for which “Delete” is selected at “Source Delete” (vpage

30) cannot be selected.

• Input sources for which “None” is selected at “Assign” (vpage 33)

cannot be selected.

• This can also be set by pressing .

• To cancel, press

to select “Source”.

i/p Scaler

This can be set to the

DVD

HDP

TV

SAT/CBL

VCR

DVR

V.AUX

The input source’s resolution

input sources.

is converted to the resolution

OFF : Do not use i/p scaler function.

set at “Resolution”.

Analog : Analog signals are converted to HDMI signals.

Analog and HDMI : Both analog signals and HDMI signals are converted

to the desired HDMI resolution.

Resolution

This can be set when the input source is set to

DVD

HDP

TV

Set the output resolution.

SAT/CBL

VCR

DVR

V.AUX

, and when “i/p Scaler” is set to anything

Resolution A : Analog Video

other than “OFF”.

Resolution H : HDMI

AUTO : Detect monitor panel resolution and automatically set output

resolution.

480p/576p / 1080i / 720p / 1080p : Select the output resolution.

Progressive Mode

This can be set when the input source is set to

DVD

HDP

TV

Select optimum progressive

SAT/CBL

VCR

DVR

V.AUX

, and when “i/p Scaler” is set to anything

mode for video material.

other than “OFF”.

AUTO : The video material is automatically detected and the appropriate

mode is set.

Video1 : Select mode suitable for video playback.

Video2 : Select mode suitable for video and 30-frame film material

playback.

Aspect

This can be set when the input source is set to

DVD

HDP

TV

Set the aspect ratio of the

SAT/CBL

VCR

DVR

V.AUX

, and when “i/p Scaler” is set to anything

video signal output from the

other than “OFF”.

HDMI terminal.

Normal : Output at 4:3 aspect ratio.

Full : Output at 16:9 aspect ratio.

Changing the Input Source’s Input Mode and Decoding mode (Input Mode)

Default settings are underlined.

The selectable input modes depend on the input source and “Assign” setting (vpage 33 “Changing the input sources assigned to the input terminals”).

Setting items	Setting contents
Input Mode	Auto : Automatically detect input signal and perform playback.
Set the audio input modes for	HDMI : Play only signals from HDMI input. (Excluding CD and SIRIUS)
the different input sources.	Digital : Play only signals from digital input.
	Analog : Play only signals from analog input.
	EXT. IN : Play only signals from EXT. IN input.
	b Upon purchase, the settings of the different input sources are as shown

below.

Input
	DVD		HDP		TV	SAT/CBL		VCR
source
Default	Auto		HDMI		Digital	Auto	Analog
setting
Input
	DVR		V.AUX		CD	TUNER
source
Default	Auto	Analog		Analog		Analog
setting

• The “HDMI” settings are made for input sources for which HDMI input terminals are assigned at “Assign” (vpage 33).

•The “Digital” settings are made for input sources for which digital input terminals are assigned at “Assign” (vpage 33).

•When a digital signal is properly input, the “” indicator lights on the display. If the “” indicator does not light, check the digital input connector assignment and the connections.

•The surround mode cannot be set if the input mode is set to “EXT. IN”.

• This can also be set by pressing .

Each time you press the button, the input mode display will change.

Auto		HDMI		Digital
	EXT. IN		Analog

Specifications Troubleshooting Information Control Remote Zone-Multi Playback Settings Connections Started

Remote control						34
	:	Displaying the menu	: Moves the cursor (Up/Down/Left/Right)	: Decision the setting	: Return to previous menu
operation buttons		Cancel the menu