ENGLISH

Getting

is pressed and held.

Front

Started

when

Connections

• The channel

switches continuously

• The time (default : 30 sec) for which the on-

 

• The song title, artist name, composer name,

 

category and reception level can be checked

 

by pressing

on the main unit.

 

Settings

screen display are displayed can be set at

menu “On-Screen Display” (vpage 31).

 

 

Press uio p to return to the original

Playback

screen.

 

 

Checking the SIRIUS Signal Strength and Radio ID

 

Zone-Multi

1Press

to select “SIRIUS”.

Front

Press

on the main unit until “SIGNAL” appears

Remote

2on the display.

 

The display will switch as shown below,

 

Control

depending on the reception conditions.

EXCELLENT

Signal strength is excellent

 

Display

 

Status

Information

GOOD

Signal strength is good

WEAK

Signal strength is weak

 

 

NO SIGNAL

No signal

 

Troubleshooting

Adjust the position of the antenna until “SIGNAL:

4want to check (example: “SR001”) is displayed.

 

3EXCELLENT” is shown on the display.

 

Press

on the main unit until the channel you

Specifications

5Press

and select channel 0 (SR000). Front

Channel No. and Sirius ID are alternately

 

 

shown on the display.

 

SR000 SiriusID

⇩

************ Sirius ID

bWrite your own SIRIUS ID for storage use. Sirius ID :

The strength of both the SIRIUS and terrestrial signals can be checked at menu “Antenna Aiming” (vpage 37).

Presetting Radio Channels (Preset Memory)

Your favorite broadcast channels can be preset so that you can tune them in easily. Up to 56 channels can be preset.

1Tune in the broadcast channel you want to preset.

2

Press

.

Front

 

 

 

 

 

Press

to select the block (A

 

3to G) in which the channel is to be

 

preset.

4Press to select the preset number (1 to 8).

5Press again to complete the setting.

To preset other channels, repeat steps 1 to 5.

NOTE

Preset channels are erased by overwriting them.

Listening to Preset Channels

1Press to select the memory block (A to G).

Press

to select the desired preset channel (1

2to 8).

 

You can also operate via the main unit. In this case, perform the following operations.

• Press , then turn on the main unit to select the preset radio channel.

Playing Components

Searching Categories

1

Press o p.

 

 

 

 

 

 

Channel category

 

CAT : Pops

 

 

 

 

 

 

Front

2Use o p to select the category, then use ui to select the desired channel.

•“UPDATING” is displayed while the encoding code is being updated.

•“SIRIUS UPDATING” is displayed when updating SIRIUS tuner firmware.

•Refer to “Troubleshooting” – “SIRIUS Satellite Radio” regarding other messages (vpage 64).

Parental Lock

1Tune to the channel you want to lock.

2

Press

for at least 3 seconds.

Front

“Code: [

]” is displayed.

 

3Enter the 4-digit lock code using uio p.

When you enter the correct code, the corresponding channel is locked.

4Press .

•Channels under Parental Lock cannot be tuned in by performing Tuning Up/Down or by category search.

•Channels stored in preset memory can be tuned in by the preset channel select operation, even if Parental Lock is applied.

•When a channel to which Parental Lock is applied is being played, Parental Lock for that channel is cancelled by performing Step2.

•See “Edit Lock Code” (vpage 37) for the method of changing Parental Lock Code.

•You can also set “Parental Lock” from the menu (vpage 37).

41