Denon AVR-1910 manual 50

ENGLISH

Getting

Setting items

Setting contents

Started

Dynamic EQ

ON : Use Dynamic EQ function.

Audyssey Dynamic EQ solves

OFF : Do not use Dynamic EQ function.

the problem of deteriorating

Connections

• When set to “ON”, “

” is displayed.

sound quality as volume is

• When “MultEQ” is set to “OFF”, “Dynamic EQ” is automatically set

decreased

by

taking

into

account human

perception

to “OFF”

and room acoustics.

• This can also be set by pressing

.

Settings

This can be set when the

Dynamic EQ : ON/Volume : OFF

Dynamic EQ / Volume : OFF

“MultEQ” (vpage 46)

is set to anything other

than “OFF”.

Playback

“Red”

“Off”

NOTE

Multi

“Tone Control” is set to “OFF” when “Dynamic EQ” is set to “ON”.

Reference Level Offset : Audyssey Dynamic EQ takes the standard film

-

mixing level of 85 dB SPL during –20 dB FS input as its reference level.

Zone

However, since standardization is lacking outside the film industry, the

Remote

reference level of media contents may not be appropriate. In order to

view such contents, Reference Level Offset of Dynamic EQ has available

offsets of 5 dB, 10 dB and 15 dB.

• 0dB : Suitable for viewing movies.

Control

• 5dB : Suitable for listening to classical music and other content mixed

at a high level.

Information

• 10dB : Suitable for listening to jazz and other audio sources with a wide

dynamic range. Also suitable for viewing TV.

• 15dB : Suitable for listening to pop, rock music and other content with an

extremely wide dynamic range.

Troubleshooting

Setting is enabled when “Dynamic EQ” is “ON” .

Dynamic Volume

ON : Use Dynamic Volume. The Dynamic Volume effect will be at the level

Audyssey

Dynamic Volume

of the “Setting” (vpage 47)

solves

the problem

of

OFF : Do not use Dynamic Volume.

large

variations

in volume

• When set to “ON”, “

” is displayed.

level

between

television

Specifications

• When “MultEQ” is set to “OFF”, “Dynamic Volume” is automatically

programs, commercials, and

set to “OFF”.

between the soft and loud

• This can also be set by pressing

.

passages of movies.

Dynamic EQ / Volume : ON

Dynamic EQ : ON / Volume : OFF

This can be set when

“Dynamic EQ” (vpage

47) is set to “ON”.

“Green”

“Red”

	Adjusting the Sound Field Effect (Parameter)
Setting items	Setting contents
Setting	Day : Low setting provides the least adjustments to the loudest and
Set Dynamic Volume effect.	softest of sounds.
This can be set when	Evening : Middle setting prevents loud and soft sounds from being much
	louder and softer respectively than average sounds.
“Dynamic EQ” (vpage
	Midnight : High setting affects volume the most, causing all sounds to be
47) is set to “ON”.
	of equal loudness.

Adjust tonal quality for each speaker using graphic equalizer (Manual EQ)

	Default settings are underlined.
Setting items	Setting contents
Adjust CH	1. Select speaker adjustment method.
Adjust the tonal quality of	All CH : Adjust tonal quality for all speakers together.
the individual speakers.	L/R CH : Adjust tonal quality for each L/R speaker pair.
	Each CH : Adjust tonal quality for each speaker separately.
	2. Select the frequency band to be adjusted.
	63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz /
	16kHz
	b When “L/R CH” or “Each CH” is selected, select the speaker to be
	adjusted.
	3. Adjust the level.
	–20.0dB ~ +6.0dB (0dB)
Base Curve Copy	Yes : Copy.
Copy the MultEQ “Audyssey	No : Do not copy.
Flat” correction curve.	“Base Curve Copy” is displayed after the Audyssey Auto Setup
	procedure has been performed.
Default	Yes : Reset to the defaults.
Reset the “Manual EQ”	No : Do not reset to the defaults.
settings to their defaults.

	Remote control
47		:	Displaying the menu	: Moves the cursor (Up/Down/Left/Right)	: Decision the setting	: Return to previous menu
	operation buttons		Cancel the menu