Denon AVR-989 Blu-rayDisc Player / DVD Player, Connecting the Monitor, Connecting the Playback Components

Connecting the Monitor

•Select the terminal to use and connect the device (vpage 9 “Video Conversion Function”).

•With HDMI connections, the video and audio signals can be transferred with a single cable.

•To output the audio signals to the monitor with HDMI connections, set menu “Manual Setup” – “HDMI Setup” – “HDMI Audio Out” to “TV” (vpage 30).

Monitor

			7*%&0
)%.*	7*%&0	4 7*%&0		$0.10/&/5 7*%&0
*/	*/	*/		*/
				: 1# 13

Connecting the Playback Components

Carefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnect correctly.

Blu-ray Disc Player / DVD Player

Select the terminal to use and connect the device.

bWhen connected to a Blu-ray Disc player, and playing Dolby TrueHD, DTS-HD, Dolby Digital Plus, connect the HDMI.

Blu-ray Disc player / DVD player

		7*%&0				"6%*0
)%.*	7*%&0	4 7*%&0	$0.10/&/5 7*%&0	"6%*0		$0"9*"-
065 b	065	065	065	065		065
			: 1# 13	-	3
				L	R
				L	R

Troubleshooting Information zone-Multi Control Remote Playback Setup Connections Started Getting

NOTE

• The component video connectors may be indicated differently on your monitor. For details, see the monitor’s operating instructions.

• The audio signals output from the HDMI connectors are only the HDMI input signals.

When using an optical cable for the digital audio connection, make the settings at menu “Input Setup”

– “Assign” – “Digital In” (vpage 38).

Specifications

12