sLevel Rch

Adjust the right channel output level.

[Variable range] –12dB ~ 0dB ~ +12dB

dVolume Level

Adjust the main volume level.

[Selectable items]

VAR : Allow volume adjustment by remote control.

–40dB : Fix the volume to –40 dB.

0dB : Fix the volume to 0 dB.

“VAR” is fixed when a power amplifier is assigned to the ZONE2 output channel at menu “Manual Setup” – “Option Setup” – “Amp Assign” (vpage 32).

fVolume Limit

Make a setting for maximum volume.

[Selectable items]

OFF : Do not set a maximum volume.

–20dB : Set the maximum volume to –20 dB.

–10dB : Set the maximum volume to –10 dB.

0dB : Set the maximum volume to 0 dB.

This can be set when “Volume Level” is set to “VAR“.

gPower On Level

Define the volume setting that is active when the power is turned on.

[Selectable items]

Last : Use the memorized setting from the last session.

–– – : Always use the muting on condition when power is turned on.

[Variable range]

–70dB ~ +18dB : Set the volume level when the power is turned on in units of 1 dB.

This can be set when “Volume Level” is set to “VAR“.

hMute Level

Set the amount of attenuation when muting is on.

[Selectable items]

Full : The sound is cut off entirely.

–40dB : The sound is attenuated by 40 dB.

–20dB : The sound is attenuated by 20 dB.

Option Setup

Make various other settings.

F Menu screen F

2.Manual Setup

 

1.Speaker Setup

2-5.Option Setup

2.HDMI Setup

1.Amp Assign

3.Audio Setup

2.Vol.Control

4.ZONE2 Setup

3.Source Delete

5.Option Setup

4.On-Screen Display

 

5.Quick Select Name

 

6.Trigger Out

 

7.Remote ID Setup

 

8.232C Port

 

9.Display

 

10.Setup Lock

a Amp Assign

Define how the amplifier for the surround back speaker channels is used.

The places where the surround back amplifier are used can be set freely according to the usage environment. This makes it possible to output sound to rooms other than the room (the MAIN ZONE) where surround playback is performed (multi-zone playback) or play the sound with high quality using the front speakers (bi-amp connections).

[Selectable items]

7.1ch : The surround back channel is output from the speakers connected to the SURR.BACK/AMP ASSIGN terminals.

ZONE2 : When ZONE2 power is on, ZONE2 sound is emitted from the speaker connected to the SURR.BACK/AMP ASSIGN terminal.

FrontA Bi-Amp : The Front A channel for Bi-Amp use is output from the speakers connected to the SURR. BACK/AMP ASSIGN terminals.

FrontB Bi-Amp : The Front B channel for Bi-Amp use is output from the speakers connected to the SURR. BACK/AMP ASSIGN terminals.

Specifications Troubleshooting Information zone-Multi Control Remote Playback Setup Connections Started Getting

For details on how to select, set and cancel settings for each menu, see “Menu Operations” (vpage 20).

32