Denon AVR-989 HDMI Control Function, Convenient Functions, NOTE, NOTE, SELECT, <SOURCE, <ZONE2 / REC SELECT

• To cancel, press <ZONE2 / REC SELECT>, then turn <SOURCE

SELECT> until “ZONE2 Source” is displayed.

• Make a test recording before starting the actual recording.

• Signals are only output to the analog REC OUT connectors when

the digital signals input to the digital input connectors (OPTICAL/

COAXIAL) are PCM (2-channel) signals.

• Digital audio signals input to the HDMI connectors are not output

•When you want to listen to TV audio by AVR-989, connect optical digital or analog.

If the TV you are using has both connection jacks, use the optical digital connection.

•When using these functions set as follows: menu “Manual Setup” – “HDMI Setup” – “HDMI Control” set to “ON“ (vpage 30).

NOTE

When using the HDMI control function, do not assign HDMI input to “TV/ CBL” by setting “Input Setup” – “Assign” – “HDMI In” in the menu.

Connections Started Getting

to the REC OUT connectors, so connect using the OPTICAL or

COAXIAL connectors.

• Sources selected with the REC OUT mode are output from ZONE2

as well.

• In the REC OUT mode, the remote control unit’s ZONE2 mode

buttons cannot be operated.

• The “XM” digital audio output signal is not output from the OPTICAL2

output connector.

NOTE

•Recordings you make are for your personal enjoyment and should not be used for other purposes without permission of the copyright holder.

•Input sources for which “Delete” is selected at “Source Delete” cannot be selected.

Convenient Functions

HDMI Control Function

When AVR-989 is connected to a TV and player compatible with HDMI control function, you can perform the following operations.

Settings other than AVR-989 settings must be made on the respective devices. (Check the operating instructions of each device for details.)

•AVR-989 power off can be linked to the TV power off step.

When you set “Output audio from amp” in the TV audio output setup operation, you can switch the amp power on.

•You can switch audio output devices with a TV operation.

(When outputting from the TV speakers, output switches from speakers connected to AVR-989).

•You can adjust AVR-989 volume in the TV volume adjustment operation.

•You can switch AVR-989 functions through linkage to TV input function switching.

•When playing the player, the AVR-989 input function switches to the function of that player.

Connections

Player compatible	Television compatible with
with HDMI	HDMI control function
control function			"6%*0
)%.*	)%.*	"6%*0		015*$"-
065	*/	065		065
		-	3
		L	R
		L	R

Specifications Troubleshooting Information zone-Multi Control Remote Playback Setup

58