Troubleshooting Information zone-Multi Control Remote Playback Setup Connections Started Getting

For details, see “Amp Assign / Multi-zone Connections and Operations” (vpage 65, 66).

sVolume Control

Set the MAIN ZONE volume setting.

Volume Limit

Make a setting for maximum volume.

[Selectable items]

OFF : Do not set a maximum volume.

–20dB : Set the maximum volume to –20 dB.

–10dB : Set the maximum volume to –10 dB.

0dB : Set the maximum volume to 0 dB.

Power On Level

This sets the volume set when the MAIN ZONE’s power is turned on.

[Selectable items]

Last : Use the memorized setting from the last session.

–– – : Always use the muting on condition when power is turned on.

[Variable range]

–80dB ~ +18dB : Set the volume level when the power is turned on in units of 1 dB.

dSource Delete

Remove input sources that are not used from the display.

[Selectable items]

ON : Use this source.

Delete : Do not use this source.

Default

Reset the settings to the default values.

NOTE

•Input sources being used in the various zones cannot be deleted.

•Input sources set to “Delete” cannot be selected using SOURCE SELECT.

fOn-Screen Display

Make on-screen display related settings.

Screensaver

Make screensaver settings.

Use the screensaver to prevent burn-in on the monitor screen. When set to “ON”, the screensaver is activated if there is no activity for about 3 minutes.

[Selectable items]

ON : Activate the screensaver if there is no activity for about 3 minutes.

OFF : Turn the screensaver function off.

Master Volume

Master volume display during adjustment.

[Selectable items]

ON : Turn display on.

OFF : Turn display off.

Tuner Information

This sets the time the on-screen display is displayed when a tuner operation is performed.

[Selectable items]

Always : Show display continuously.

30sec : Show display for 30 seconds after operation.

10sec : Show display for 10 seconds after operation.

OFF : Turn display off.

iPod Information

This sets the time the on-screen display is displayed when an iPod operation is performed.

[Selectable items]

Always : Show display continuously.

30sec : Show display for 30 seconds after operation.

10sec : Show display for 10 seconds after operation.

OFF : Turn display off.

Display Mode

Select the on-screen display’s display mode.

Specifications

Mute Level

This sets the amount of attenuation of the volume when the mute mode is set in the MAIN ZONE.

[Selectable items]

Full : The sound is cut off entirely.

–40dB : The sound is attenuated by 40 dB.

–20dB : The sound is attenuated by 20 dB.

When “Screensaver” is set to “ON”, the screensaver is activated if no operation is performed for about 3 minutes.

When you press uio p, the screensaver is cancelled and the screen before that screensaver started is displayed.

Text

Input source and mode display.

[Selectable items] ON : Turn display on. OFF : Turn display off.

[Selectable items]

Mode1 : If there is no video signal, flickering of the on-screen display is not prevented.

Mode2 : Prevents flickering of the on-screen display when there is no video signal.

Use this mode if the on-screen display does not appear in the Mode 1, as may happen according to the TV being used.

33For details on how to select, set and cancel settings for each menu, see “Menu Operations” (vpage 20).