
Connecting the Power Cord
Wait until all connections have been completed before connecting the power cord.
Menu Operations
Started Getting
•These outlets supply power to external audio equipment.
• The power supplied from these outlets turns on and off together with the set’s power switch.
• Audio equipment with a total power consumption of 120 W (1 A) can be connected.
Power cord | To household | |
(supplied) | ||
power outlet | ||
| ||
| (AC 120 V, 60 Hz) |
NOTE
•Insert the AC plugs securely. Incomplete connections could cause noise.
•Only use the AC outlets to plug in audio equipment. Do not use them as power supplies for hairdryers or anything other than audio equipment.
Once Connections are
Completed

Turning the Power On (vpage 50)
Symbols used to indicate buttons in this manual
Button located on both the main unit
and the remote control unit BUTTON
Button only on the main unit <BUTTON>
Button only on the remote control unit [BUTTON]
uiop
<MENU> ENTER RETURN
[Front] | [Rear] |
[A. MENU]
ENTER
uiop
RETURN
With the
Operations
The same operation is possible on the main unit or remote control unit.
1Press <MENU> or [A.MENU].
The menu is displayed.
b To operate from the remote control unit, be sure to set the [SOURCE CONTROL 1] to “AUDIO”.
2Press ui to select the item you want to set, then press ENTER.3Press ui again to select the item you want to set, then press ENTER.4To change the setting:Press uito select the item you want to change, then press o p to change the setting.
b To return to the previous item, press RETURN.
b Select “Default Yes”, then press o to reset to the default setting.
5Press ENTER to enter the setting.6Press <MENU> or [A.MENU] to finish.When <MENU> or [A.MENU] is pressed, the settings made up to that point are entered and the settings menu screen turns off.
Specifications Troubleshooting Information
0