Specifications Troubleshooting Information zone-Multi Control Remote Playback Setup Connections Started Getting

•When the menu “Speaker Configuration” – “Surround Back Speaker” setting (vpage 27) is set to “1spkr”, the surround back speaker display is set to “SB”.

•Speakers set to “None” in the “Speaker Configuration” settings are not displayed.

•When “Channel Level” is adjusted, the adjusted values are set for all the surround modes. To adjust the channel level separately for the different surround modes, use the operation see page 59.

gCrossover Frequency

Select crossover frequency from which subwoofer handles low range signal.

[Selectable items]

40Hz 60Hz 80Hz 90Hz 100Hz 110Hz 120Hz 150Hz200Hz 250Hz :

Only the portion of the bass sound of the various speakers output from the subwoofer that has a frequency below the frequency set here is output.

Set this according to the low frequency reproduction capabilities of the speakers you are using.

Advanced :

Set the crossover frequency separately for the different speakers.

•If in the “Advanced” settings, “Subwoofer Setup” (vpage 28) in the menu is set to “LFE”, it is possible to make this setting for speakers set to “Small“ at “Speaker Configuration”. If set to “LFE+Main”, this setting can be made regardless of the speaker size.

•For speakers set to “Small”, sound below the crossover frequency is cut from the sound output. The cut bass sound is output from the subwoofer or front speakers.

•Always set the crossover frequency to “80 Hz”. When using small speakers, however, we recommend setting the crossover frequency to a higher frequency.

hFront Speaker Setup

Select front speakers to use for each surround mode.

[Selectable items]

Normal : To change the settings, select “Custom”.

Custom : When set to “Custom”, you can select beforehand the

front speaker to use for each surround mode.

[Selectable items]

DIRECT/STEREO :

A

 

B

 

A+B

 

 

 

 

 

 

MULTI CH :

A

 

B

 

A+B

 

 

 

 

 

 

NOTE

When set to “Custom”, <SPEAKERS> does not operate.

HDMI Setup

Make settings for HDMI video/audio output.

FMenu screen F

2.Manual Setup

1.Speaker Setup

2-2.HDMI Setup

 

 

 

2.HDMI Setup

Color Space

3.Audio Setup

 

YCbCr

4.ZONE2 Setup

 

 

 

 

5.Option Setup

RGB Range

 

 

 

 

Normal

 

Auto Lipsync

 

 

ON

: OFF

 

2-2.HDMI Setup

 

HDMI Audio Out

 

 

AMP

 

HDMI Control

 

 

ON

: OFF

 

Power Off Control

 

 

ON

: OFF

aColor Space

Make settings for output color space.

[Selectable items]

YCbCr : Output using YCbCr format.

RGB : Output using RGB format.

When connected to a monitor with a DVI-D connector (HDCP compatible) using an HDMI/DVI converter cable, the signals are output in RGB format, regardless of this setting.

sRGB Range

Make settings for RGB output range.

[Selectable items]

Normal : Use video range from 16 (black) to 235 (white).

Enhanced : Video range from 0 (black) to 255 (white). Use this setting to avoid black washout.

When “YCbCr” is selected under “Color Space”, “RGB Range” will have no effect.

dAuto Lipsync

Automatic compensation for timing shift in audio and video output.

[Selectable items]

ON

 

OFF

29For details on how to select, set and cancel settings for each menu, see “Menu Operations” (vpage 20).