Started Getting

Other Operations and Functions

Specifications Troubleshooting Information zone-Multi Control Remote Playback Setup Connections

Symbols used to indicate buttons in this manual

Button located on both the main unit

and the remote control unit BUTTON

Button only on the main unit <BUTTON>

Button only on the remote control unit [BUTTON]

<SOURCE SELECT> INPUT MODE

<ZONE 2 / REC SELECT>

Surround mode

[Front]

[Rear]

[SOURCE

[SOURCE

SELECT]

 

SELECT]

 

Surround mode

 

INPUT MODE

Other Operations

Playing Super Audio CD

1Assign the HDMI input connector at the “HDMI” setting (vpage 38).

2Either turn <SOURCE SELECT> or press [SOURCE SELECT] to select the input source assigned in step 1.

The “ ” indicator lights on the display.

3Press INPUT MODE to select “AUTO” (vpage 37). Select the input mode according to the program source to be played.

4Select the surround mode (vpage 40 ~ 42). We recommend playing in the DIRECT mode.

5Start playing the Super Audio CD. The “” indicator lights on the display.

For operating instructions, refer to the respective equipment’s operating instructions.

•When playing DSD signals in the DIRECT or PURE DIRECT mode, the DSD signals are converted as such into analog signals. When playing in other surround modes, the DSD signals are first converted into PCM format, then into analog signals.

•“DSD DIRECT” is shown on the display when playing DSD 2-channel signals in the DIRECT mode. “DSD MULTI DIRECT” is shown on the display when playing DSD multi-channel signals in the DIRECT mode.

Recording on an External Equipment (REC OUT mode)

You can listen to one program source while recording a different program source.

1Press <ZONE2 / REC SELECT> until “ZONE2 Source”. “ZONE2 Source” is shown on the display.

2Turn <SOURCE SELECT> until “RECOUT Source” is displayed.

The “

 

” indicator lights.

 

 

 

 

ZONE2 Source

 

ZONE2 TUNER

 

····

 

ZONE2 SIRIUS

 

 

 

RECOUT SIRIUS······ RECOUT TUNER RECOUT Source

3Turn <SOURCE SELECT> to choose the input source to be recorded.
4Play the program source.

For operating instructions, refer to the respective equipment’s operating instructions.

To record FM or AM broadcasts, select the broadcast (vpage 51).

5Start recording.

For operating instructions, refer to the respective equipment’s operating instructions.