ENGLISH
Easy Setup and OperationEasy Setup and Operation
|
|
|
| ON/STANDBY | 6 | Press the 1 button. |
|
|
|
|
|
|
| ||
|
|
|
| 7 |
|
| |
5 | 2 | 1 | 1 |
| Adjust the volume. |
| |
|
|
|
| ||||
|
|
|
|
| |||
|
|
| 2 |
|
|
|
|
|
|
|
| VOLUME |
| (Main unit) | (Remote control unit) |
|
|
|
|
|
| ||
ON/STANDBY | VOLUME |
|
|
|
|
| |
|
|
|
|
|
|
| The volume is shown on |
|
|
|
|
|
|
| the display. |
MUTE
Playing a DVD disc
•Pick up the disc carefully so as not to touch the signal surface and hold it with the labeled side facing up.
•With the disc tray fully open, set the disc in the disc tray.
• If | appears on the TV screen while buttons are being |
operated, that operation is not possible on the | |
that disc. | |
• The disc keeps turning while the menu screen is displayed on | |
the TV screen. | |
1 Check that all connections are correct.
2 Turn on your monitor (TV).
Switch the input selector on the TV to this unit.
3 Press the ON/STANDBY switch.
• The power indicator lights orange, the power turns on and the display lights.
Several seconds are required from the time the ON/STANDBY switch is pressed until the power turns on. This is due to the
Even when the ON/STANDBY switch has been pressed again and the power has been set to the standby mode, power is still supplied to some circuits. When leaving home or traveling, be sure to unplug the power supply cord from the power outlet. In the standby mode, the power indicator is lights red. The indicator is yellow when the timer is set.
4 Press the 5 button to set the DVD disc in the disc tray.
Disc tray
5 Press the 5 button.
The disc tray can also be closed automatically to load the disc by pressing the 1 button. After this, playback starts automatically.
NOTE: |
• Do not press the disc tray in by hand when the power is off. |
Doing so will damage it. |
• Do not place foreign objects in the disc tray. Doing so will |
damage it. |
• If a foreign object is caught in the disc tray during closing, |
simply press the 5 button again and the tray will open. |
13
ENGLISH