System Setup
3 Press the CURSOR • or ª button to select “ENABLE”.
DISABLE (Factory default):
Set this to disable the “ONCE TIMER” or “EVERY TIMER” function that has been set.
ENABLE:
Set this to enable the “ONCE TIMER” or “EVERY TIMER” function that has been set.
4 Press the CURSOR •, ª, 0 or 1 button to select start time, end time, and function, then press the ENTER button.
When “TUNER” is selected, the preset frequency can also be selected.
Example:
Listening to P01 (FM 92.5 MHz) from “PM 0:35” to “PM 0:56” using the “EVERY TIMER”.
5 Press the CURSOR • or ª button to select “EXIT SETUP”, then press the ENTER button.
•The timer is turned on and the timer standby indicator
lights. This completes the setting of the timer.
6 Press the ON/STANDBY switch.
• The standby mode is set.
(The power indicator turns yellow.)
When the timer start time is reached, the timer operates.
•To exit the once timer or every timer set mode:
Press the RETURN button, you can go back to the previous screen.
2Checking the timer settings
1 Press the HELP button to display the help screen.
2 Press the CURSOR • or ª button to select “SETUP”, then press the ENTER button.
3 Press the CURSOR 0 or 1 button to select “TIMER SETUP”, then press the ENTER button.
• Press the STATUS button in the standby mode to show on the
Example:
When the “ONCE TIMER” is on and the “EVERY TIMER” is off
1 on/Eoff
2Sleep timer, every timer and once timer priority
If the times set for the sleep timer, every timer and once timer overlap, the priority is as follows:
every timer → once timer → sleep timer
2Changing the timer settings
Reset the timer from the start using the desired settings. The new settings overwrite the previous settings.
2Quitting the timer setting
(turning the operation of the timer off)
Select ”DISABLE” at the ”ONCE TIMER” or ”EVERY TIMER” setting screen.
ENGLISH
System Setup
2If there is a power failure
•If there is a power failure or the power supply cord is unplugged from the power outlet, the time display flashes when the power comes back on. Reset the current time.
•The once timer settings are deleted. Remake the settings.
•If the everyday timer settings and the tuner presettings have been deleted, reset them.
After changing the system settings
•This completes the procedure for changing the system settings. Once the channel levels, distances and speaker location have been set, there is no need to change the settings again unless the connected AV components or speakers are changed or the speakers are moved to different positions.
•DVD auto power off as necessary.
At the “SETUP” menu screen, press the HELP button.
•The new settings are entered and the
The setup procedure can be quit at any point by pressing this button.
54
ENGLISH