ENGLISH
System Setup
3 When “SLIDE SHOW” is selected:
Press the CURSOR • or ª button to select the
button.
5 ~ 15SEC (Factory default : 5 SEC):
The interval can be set from 5 to 15 seconds in steps of 1 second.
3 When “AUTO POWER MODE” is selected: Press the CURSOR • or ª button to select the
OFF (Factory default):
The auto power off function is not activated.
ON:
The function for automatically turning the power off when the function is set to DVD is activated.
3 When “SCREEN SAVER” is selected:
Press the CURSOR • or ª button to select the
button.
OFF (Factory default):
Select this when you do not want the screen saver to operate.
ON:
Select this to start up the screen saver. The screen saver starts up if no operation is performed for about 5 minutes.
4 Press the CURSOR ª button to select “NEXT
SETUP MENU”, then press the ENTER to enter the setting.
• The next screen in the “SETUP” menu screen appears.
System Setup
Setting “TIMER SETUP”
•With the
•Be sure to set the current time ( 
page 33). The timer will not operate if the current time is not set.
2Setting the “ONCE TIMER” and “EVERY TIMER”
1 Press the CURSOR 0 or 1 button to select “TIMER SETUP” icon, then press the ENTER button.
• The “TIMER SETUP” menu screen appears.
2 Press the CURSOR • or ª button to select “ONCE TIMER” or “EVERY TIMER”, then press the ENTER button.
• The respective timer setting screens are displayed.
ONCE TIMER:
Use the once timer to switch the power on and off (standby) at the specified time once only.
EVERY TIMER:
Use the every timer to switch the power on and off (standby) once at the same time each day.
CLOCK SETUP:
Use to set the current time ( 
page 33, 34).
53
ENGLISH