System Setup
2 Press the CURSOR • or ª button to select “CHANNEL LEVEL”, then press the ENTER button.
• The channel level setting screen appears.
3 Press the CURSOR 0 or 1 button to select “AUTO”, “MANUAL” or “OFF” for the “TEST TONE” mode, then press the ENTER button.
AUTO:
Adjust the levels listening to test tones automatically output from the different speakers.
MANUAL:
Select the speakers from which the test tones are output when adjusting the levels.
OFF (Factory default):
The test tones are not output.
Detailed settings can be made when this is set to “MANUAL” first.
4 When “AUTO” mode is selected:
Press the CURSOR 0 or 1 button to adjust all
•Test tones are automatically output from the speakers at intervals of 4 seconds for two of the cycles shown below, then at intervals of 2 seconds from the third cycle on.
Front left |
| Front right |
|
Subwoofer
The level changes in units of 1 dB each time the CURSOR 0 or 1 button is pressed.
The level can be adjusted in the range
4 When “MANUAL” or “OFF” mode is selected: Press the CURSOR • or ª button to select the
to adjust all the speakers to the same volume.
5 Press the ENTER button twice.
• The “SPEAKER SETUP” screen appears.
6 Press the CURSOR ª button to select “SETUP
MENU”, then press the ENTER button.
• The “AUDIO SETUP” screen appears.
7 Press the CURSOR ª button to select “NEXT
SETUP MENU”, then press the ENTER to enter the setting.
•The next screen in the “SETUP” menu screen appears.
•When the channel levels are adjusted at the channel level settings, the adjusted values are applied to all playback modes.
48
ENGLISH
System Setup
Setting “DISTANCE”
•Input the distances from the listening position and the various speakers to set the surround delay time.
•Upon shipment from the factory default the distance is set to the default values in step 4 below.
Preparation:
Measure the distance from the listening position to the various speakers.
FLFR
Subwoofer 
listening position
L1: Distance between front right speaker and listening position
L2: Distance between front left speaker and listening position
L3: Distance between subwoofer speaker and listening position
1 Press the CURSOR • or ª button to select “SPEAKER SETUP” at the “AUDIO SETUP”, then press the ENTER button.
• The “SPEAKER SETUP” screen appears.
ENGLISH