ENGLISH
System Setup
3 When “COMPRESSION” is selected:
Press the CURSOR • or ª button to select the
button.
OFF (Factory default):
Set to “OFF” to turn this function off.
LOW, MID, HIGH:
This parameter adjusts the dynamic range of the Dolby Digital or DTS sound. When listening with the volume turned relatively low, at night for example, set this to the “HIGH” side to lower the peak of the sound and amplify the quieter sounds, narrowing the dynamic range and making the sound easier to listen to.
With DTS source, only displayed for sources compatible with dynamic range compression.
3 When “AUDIO DELAY” is selected:
Press the CURSOR • or ª button to select the
button.
0 ~ 200mSEC (Factory default 0mSEC) :
When watching a DVD or other video source, the picture on the monitor may seem delayed with respect to the sound. In this case, adjust the audio delay to delay the sound and synchronize it with the picture.
The audio delay setting is stored separately for each input source.
With a movie source, for example, adjust so that the movement of the actor‘s lips is synchronized with the sound. 
The audio delay setting does not apply when playing in the analog input and stereo mode. (DIRECT ON)
4 Press the CURSOR ª button to select “NEXT
SETUP MENU”, then press the ENTER to enter the setting.
• The next screen in the “SETUP” menu screen appears.
47
System Setup
Setting “CHANNEL LEVEL”
•Adjust so that the playback levels of the different channels are equal.
•Make this adjustment by listening to the test tones output from the speakers at the listening position.
Use the VOLUME control knob on the main unit or the VOLUME buttons on the remote control unit to adjust the volume of the test tone to a level at which it is easy to make this adjustment.
1 Press the CURSOR • or ª button to select “SPEAKER SETUP” at the “AUDIO SETUP”, then press the ENTER button.
• The “SPEAKER SETUP” screen appears.
ENGLISH