ENGLISH
Basic Operation
FUNCTION
VOLUME
DVD 
AUX
TUNER
VOLUME
DVS/CINEMA
CURSOR
SURROUND
| CURSOR |
STATUS | SURROUND |
| PARAMETER |
Function setting
1 Press the FUNCTION button on the main unit, and DVD, TUNER or AUX button on the remote control unit to select the input function to be played.
• The function switches as shown below.
(Main unit) | (Remote control unit) |
When the FUNCTION button on the main unit is pressed:
DVD 
TUNER 
iPod 
USB 
Portable
(Front IN)
AUX3 
AUX2 
AUX1
When the AUX button on the remote control unit is pressed:
iPod 
USB 
Portable
(Front IN)
AUX3 
AUX2 
AUX1
iPod, USB and Portable are only displayed and selectable when the corresponding components is connected.
2 Press the SURROUND button to select the surround mode.
•The surround mode switches as shown below each time the SURROUND button is pressed.
DOLBY VS REF.
DOLBY VS WIDE 
STEREO
JAZZ CLUB 
ROCK ARENA 
3 When “STEREO” is selected:
Press the SURROUND PARAMETER button, then press the CURSOR 0 or 1 button to set.
DIRECT ON OFF
4 Start playback on the selected component.
For operating instructions, refer to the component’s manual.
31
Basic Operation
5 Adjust the volume.
(Main unit) | (Remote control unit) |
The volume is shown on the display.
The volume can be adjusted within the range
2Surround parameters q
DIRECT MODE:
•ON:
The analog input signals are played without DSP processing. The settings made at “DISTANCE” under “SETUP” ( 
page 54) are not reflected.
•OFF:
The analog input signals are converted into digital signals and undergo DSP processing.
The “DIRECT MODE” only functions with analog inputs and in the stereo mode.
2To check the currently playing program source, etc.
Press the STATUS button.
•The current program source and surround settings are shown on the display each time the button is pressed.
2Input signal display
• DOLBY DIGITAL | • DTS | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ENGLISH