ENGLISH
System Setup
Setting “AUDIO SETUP”
1 Press the CURSOR 0 or 1 button to select “AUDIO SETUP” icon, then press the ENTER button.
• The “AUDIO SETUP” menu screen appears.
2 Press the CURSOR • or ª button to select the desired setting item, then press the ENTER button.
SPEAKER SETUP:
“CHANNEL LEVEL” ( 
page 53), “DISTANCE” ( 
page
54) and “SPEAKER LOCATION” ( 
page 54, 55) can be set.
INPUT MODE:
When DVD or AUX was selected as the input function, use this to select the input mode.
DIGITAL OUT:
Use this to select the digital output’s signal format.
LPCM (44.1 kHz / 48 kHz):
Use this to set the digital audio output when playing DVDs recorded in linear PCM audio.
SACD LAYER:
Use this to switch the area / layer of the Super audio CDs played with priory.
COMPRESSION:
Use this to adjusts the dynamic range of the Dolby Digital or DTS sound.
AUDIO DELAY:
Use this to synchronize the sound and video.
3 When “INPUT MODE” is selected:
Press the CURSOR • or ª button to select the
button.
AUTO (Factory default):
In this mode, the type of signal being input to the digital and analog input terminals is detected and the program in the set’s surround decoder is switched automatically to play the signals for the selected input function.
The presence or absence of digital signals is detected, the signals input to the digital input are identified and decoding and playback are performed automatically in DTS, Dolby Digital or PCM (2 channel stereo) format.
If no digital signal is being input, the analog input terminals are selected.
Use this mode to play Dolby Digital signals.
DTS:
Decoding and playback are only performed when DTS signals are being input.
PCM:
Decoding and playback are only performed when PCM signals are being input.
ANALOG:
The signals input to the analog input terminals are played. (This cannot be selected in the DVD mode.)
Different input modes can be selected for each input function. The selected input mode is stored in the memory for the individual input functions.
When the input function is set to something other than the above, “ANALOG ONLY” is displayed and the input mode cannot be selected.
The input mode automatically switches to “AUTO” if you switch the input function to DVD from anything other than DVD.
System Setup
3 When “DIGITAL OUT” is selected:
Press the CURSOR • or ª button to select the
button.
NORMAL (Factory default):
Make the selection when playing back in surround playback a DVD that has been recorded with Dolby Digital or DTS on this unit.
The Dolby Digital or DTS digital signal is also output from the digital output terminals.
PCM:
DVDs that were recorded in Dolby Digital or DTS are converted to linear PCM 48 kHz/16 bit (2 channels). Make the selection when making a digital recording.
51
ENGLISH