
System Setup
3 When “LPCM (44.1 kHz/48 kHz)” is selected: Press the CURSOR • or ª button to select the
OFF (Factory default):
Make the selection when playing back to a decoder DVDs that were recorded with this unit using linear PCM 48 kHz/20/24 bit and 96 kHz modes. Note that DVDs with Copyright Protection are converted to 48 kHz/16 bits and played back.
The same signal is output from the digital output terminals.
ON:
DVDs that were recorded with linear PCM 48 kHz/20/24 bit and 96 kHz modes are all converted to 48 kHz/16 bits. Make this selection at the time of digital recording.
When playing Dolby Digital / DTS surround DVDs or 96 kHz linear PCM DVDs on the
When and only when you want to output the signals of the Dolby Digital / DTS surround DVD being played on the
With this setting, DVDs cannot be played on the
When and only when you want to make a digital recording of the signals of a 48
With this setting it is not possible to decode and play 48
3 When “SACD LAYER” is selected:
Press the CURSOR • or ª button to select the
button.
MULTI:
When playing a Super Audio CD disc, the
STEREO (Factory default):
When playing a Super Audio CD disc, the stereo area will be played back with priority.
CD:
When playing a Super Audio CD disc, the CD layer will be played back with priority.
When playing back a disc that does not have a selected area/layer, another area/layer will be played back automatically.
3 When “COMPRESSION” is selected:
Press the CURSOR • or ª button to select the
button.
52
ENGLISH
System Setup
OFF (Factory default):
Set to “OFF” to turn this function off.
LOW, MID, HIGH:
This parameter adjusts the dynamic range of the Dolby Digital or DTS sound. When listening with the volume turned relatively low, at night for example, set this to the “HIGH” side to lower the peak of the sound and amplify the quieter sounds, narrowing the dynamic range and making the sound easier to listen to.
With DTS source, only displayed for sources compatible with dynamic range compression.
3 When “AUDIO DELAY” is selected:
Press the CURSOR • or ª button to select the
button.
0 ~ 200mSEC (Factory default 0mSEC) :
When watching a DVD or other video source, the picture on the monitor may seem delayed with respect to the sound. In this case, adjust the audio delay to delay the sound and synchronize it with the picture.
The audio delay setting is stored separately for each input source.
With a movie source, for example, adjust so that the movement of the actor‘s lips is synchronized with the sound.
The audio delay setting does not apply when playing in the analog input and stereo mode (DIRECT ON).
4 Press the CURSOR ª button to select “NEXT
SETUP MENU”, then press the ENTER to enter the setting.
• The next screen in the “SETUP” menu screen appears.
ENGLISH