System Setup

Setting “DISTANCE”

•Input the distances from the listening position and the various speakers to set the surround delay time.

•Upon shipment from the factory default the distance is set to the default values in step 4 below.

Preparation:

Measure the distance from the listening position to the various speakers.

FLFR

Subwoofer

listening position

L1: Distance between front right speaker and listening position

L2: Distance between front left speaker and listening position

L3: Distance between subwoofer speaker and listening position

1 Press the CURSOR • or ª button to select “SPEAKER SETUP” at the “AUDIO SETUP”, then press the ENTER button.

• The “SPEAKER SETUP” screen appears.

2 Press the CURSOR • or ª button to select “DISTANCE”, then press the ENTER button.

• The distance setting screen appears.

3 Press the CURSOR 0 or 1 button to select “FEET” or “METERS” for the “DISTANCE” mode, then press the CURSOR ª button.

4 Press the CURSOR • or ª button to select the speaker, then press the CURSOR 0 or 1 button to set the distance between the speaker and the listening position.

•The distance changes by 1 foot (or 0.1 meters when the unit is set to feet) each time the CURSOR 0 or 1 button is pressed. Select the value closest to the measured distance.

Make sure the difference in the distances set for the various speakers is no greater than 15 feet (4.5 meters). If an inappropriate distance is set, “CAUTION: INVALID DISTANCE” is displayed. Change the position of the speaker and make the setting over.

To set the distance of the various speakers back to their default values, press the CURSOR • or ª button to select “DEFAULT” then press the ENTER button.

ENGLISH

System Setup

5 Press the CURSOR ª button to select “SETUP

MENU”, then press the ENTER button.

• The “SPEAKER SETUP” screen appears.

6 Press the CURSOR ª button to select “NEXT

SETUP MENU”, then press the ENTER to enter the setting.

• The next screen in the “SETUP” menu screen appears.

Setting “SPEAKER LOCATION”

The optimum acoustics can be achieved by setting the location of the speakers and the conditions in the room.

1 Press the CURSOR • or ª button to select “SPEAKER SETUP” at the “AUDIO SETUP”, then press the ENTER button.

• The “SPEAKER SETUP” screen appears.

54

ENGLISH