Desa (V)CD36RP Removing/Replacing Glass Door, Pressure Testing Fireplace Gas Connections

Models: V)CD36RN (V)CD36TN (V)CD36RPE (V)CD36RNE (V)CD36RP (V)CD36TNE (V)CD36TP (V)CD36TPE

1 52
Download 52 pages 28.86 Kb
Page 29
Image 29

Fireplace

Installation

Continued

Pressure Testing Fireplace Gas

Connections

1. Open equipment shutoff valve (see Figure 52, page 28).

2. Open propane/LP supply tank valve for propane/LP fireplace or main gas valve located on or near gas meter for natural gas fireplace.

3. Make sure control knob of fireplace is in the OFF position.

4. Check all joints from equipment shutoff valve to gas valve (see Figure 53 for propane/LP or Figure 54 for natural gas). Apply noncorrosive leak detection fluid to all joints. Bubbles form- ing show a leak. Correct all leaks at once.

5. Light fireplace (see Operating Fireplace, page

31). Check all other internal joints for leaks.

6. Turn off fireplace (see To Turn Off Gas to Ap- pliance, page 32 or 35 depending on model).

Removing/Replacing Glass

Door

CAUTION: Do not operate this fireplace with a broken glass door panel or without the glass door panel securely in place. For replacement part informa- tion see Replacement Parts, page 44.

CAUTION: Wear gloves and safety glasses while handling or removing broken glass. Do not remove if glass is hot. Keep children and pets away from glass.

WARNING: If fireplace has been running, turn off and un- plug fireplace. Let cool before re- moving glass door or louvers.

Removing Lower Louver Access Panel

1.Grasp the lower louver panel and pull up until the hanger brackets release from the door pins (see Figure 55).

2.Swing the louver panel out until it clears the fireplace opening.

3.Pull the entire panel out until the bottom tabs are free of the slot openings in the lower face frame.

Door Pin

Lower Louver

 

Access Panel

Hanger Bracket

Figure 55 - Removing Lower Louver

Access Panel

Removing Top Louver Trim Panel

1.Grasp the two hanger brackets at the bottom and pull up until the hanger brackets release from the door pins (see Figure 56).

2.Swing out the bracket ends until the upper panel tabs can be angled out of the slot open- ings in the upper face frame.

3.Pull the entire louver trim panel out of the face frame.

Panel Tabs

Top Louver

Trim Panel

Hanger

Bracket

Door Pin

Figure 56 - Removing Top Louver Trim

Panel

116035-01E

www.desatech.com

29

Page 29
Image 29
Desa (V)CD36RP Removing/Replacing Glass Door, Pressure Testing Fireplace Gas Connections, Removing Top Louver Trim Panel