3
BIOS Setup 
Limit CPUID MaxVal
The CPUID instruction of some newer CPUs will return a value greater than 3. The default is Disabled because this problem does not exist in the Windows series operating systems. If you are using an operating system other than Windows, this problem may occur.To avoid this problem, enable this field to limit the return value to 3 or lesser than 3.
NX BIOS Control
The default is Enabled. When this function is disabled, it forces the NX features flag to always return to 0.
3.1.2.2 Hard Disk Boot Priority
This field is used to select the boot sequence of the hard drives. Move the cursor to this field then press <Enter>. Use the Up or Down arrow keys to select a device then press <+> to move it up or
The settings on the screen are for reference only. Your version may not be identical to this one.
64
