DFI 915g-tmgf, 915gv-tml Hardware Installation 1 PS/2 Mouse and PS/2 Keyboard Ports, Bios Setting

2

Hardware Installation

2.5.1 PS/2 Mouse and PS/2 Keyboard Ports

PS/2 Mouse	W
PS/2 Keyboard

The system board is equipped with an onboard PS/2 mouse (Green) and PS/2 keyboard (Purple) ports - both at location CN7 of the system board. The PS/2 mouse port uses IRQ12. If a mouse is not connected to this port, the system will reserve IRQ12 for other expansion cards.

.

.

.

.

.

.

.

.

Warning:

Make sure to turn off your computer prior to connecting or disconnecting a mouse or keyboard. Failure to do so may damage the system board.

Wake-On-PS/2 Keyboard/Mouse

The Wake-On-PS/2 Keyboard/Mouse function allows you to use the PS/2 keyboard or PS/2 mouse to power-on the system. To use this function:

•Jumper Setting:

JP3 must be set to “2-3 On: 5VSB”. Refer to “PS/2 Power Select” in this chapter for more information.

•BIOS Setting:

Configure the PS/2 keyboard/mouse wake up function in the Integrated Peripherals submenu (“Super IO Device” section) of the BIOS. Refer to chapter 3 for more information.

34