BIOS Setup
SATA Port
If the “PATA IDE Mode” field is set to Primary, this field will show “P1, P3 is Secondary”; meaning SATA 2 and SATA 4 are Secondary.
If the “PATA IDE Mode” field is set to Secondary, this field will show “P0, P2 is Primary”; meaning SATA 1 and SATA 3 are Primary.
3.1.4.2 Onboard Device
Move the cursor to this field and press <Enter>. The following screen will appear.
3
The settings on the screen are for reference only. Your version may not be identical to this one.
USB Controller
Enabled Enables the onboard USB.
Disabled Disables the onboard USB.
USB 2.0 Controller
If you are using a USB 2.0 device, this field must be set to Enabled.
USB Keyboard Support
By default, this field is Disabled. However, if you are using a USB keyboard under DOS, make sure to enable this function.
77
