3

BIOS Setup

3.1.5.18 Time (hh:mm:ss) Alarm

This is used to set the time you would like the system to power-on. If you want the system to power-on everyday as set in the “Date (of Month) Alarm” field, the time set in this field must be later than the time of the RTC set in the Standard CMOS Features submenu.

3.1.5.19 Reload Global Timer Events

When enabled, access to the specified field (Primary IDE 0/1, Secondary IDE 0/1, FDD/COM/LPT Port or PCI PIRQ[A-D]#) will cause the system to wake up completely from the power manage- ment mode. When disabled, the system will not wake up from the power management mode despite access to the specified field.

8 6

Page 86
Image 86
DFI 915gv-tml, system board, 915g-tmgf user manual Time hhmmss Alarm, Reload Global Timer Events