2

Hardware Installation

2.Place the heat sink on top of the CPU. The 4 studs around the heat sink which are used to secure the heat sink onto the system board must match the 4 mounting holes around the socket.

Position each stud so that the groove faces the heat sink then push it down firmly until it clicks into place.

Note:

You will not be able to secure the fan and heat sink assembly in place if the groove is not facing the heat sink.

Mounting

Mounting

hole

hole

 

Mounting

Mounting

hole

hole

Fan

Groove

Heat sink

Stud

3.Connect the CPU fan’s cable connector to the CPU fan connec- tor on the system board.

28

Page 28
Image 28
DFI 915g-tmgf, system board, 915gv-tml user manual Hole