DFI 915gv-tml, system board Jumper Settings, Clear Cmos Data, If you encounter the following

Hardware Installation

2.4 Jumper Settings

2.4.1 Clear CMOS Data

2

	3	2	1
	1-2 On: Normal
	(default)
	3	2	1
JP4	2-3 On:
	X Clear CMOS Data

If you encounter the following,

a)CMOS data becomes corrupted.

b)You forgot the supervisor or user password.

c)You are unable to boot-up the computer system because the processor’s ratio/clock was incorrectly set in the BIOS.

you can reconfigure the system with the default values stored in the

ROM BIOS.

To load the default values stored in the ROM BIOS, please follow the steps below.

1.Power-off the system.

2.Set JP4 pins 2 and 3 to On. Wait for a few seconds and set JP4 back to its default setting, pins 1 and 2 On.

3.Now power-on the system.

If your reason for clearing the CMOS data is due to incorrect setting of the processor’s ratio/clock in the BIOS, please proceed to step 4.

29