BIOS Setup
3.2 Updating the BIOS
To update the BIOS, you will need the new BIOS file and a flash utility, AWDFLASH.EXE. You can download them from DFI’s web site or contact technical support or your sales representative.
1.Save the new BIOS file along with the flash utility AWDFLASH.EXE to a floppy disk.
2.Reboot the system and enter the Award BIOS Setup Utility to set the first boot drive to “Floppy”.
3.Save the setting and reboot the system.
4.After the system booted from the floppy disk, execute the flash utility by typing AWDFLASH.EXE.The following screen will appear.
Award BIOS Flash Utility V.8.15B
(C) Phoenix Technologies Ltd. All Rights Reserved.
(The current BIOS information will appear in this area.)
File Name to Program :
5.Type the new BIOS file name onto the gray area that is next to “File Name to Program” then press <Enter>.
3
9 9