2
Hardware Installation 
2.2.1 Installing the DIMM
A DIMM simply snaps into a DIMM socket on the system board. Pin 1 of the DIMM must correspond with Pin 1 of the socket.
Notch
Key
Tab | Tab |
|
Pin 1
1.Pull the “tabs” which are at the ends of the socket to the side.
2.Position the DIMM above the socket with the “notch” in the module aligned with the “key” on the socket.
3.Seat the module vertically into the socket. Make sure it is completely seated. The tabs will hold the DIMM in place.
22
