Section 3 PREPARATIONS

 

Insert the appropriate paper size label into the front of the

 

Open the multi-bypass tray.

8

drawer to indicate the size of paper that is loaded into that

1

 

 

 

 

drawer.

NOTE

If you will not be using the copier for a prolonged period of time, remove all paper from the drawer(s) and seal in its original packaging in order to protect it against moisture.

(3) Setting paper on the multi-bypass tray

Up to 150 sheets of standard paper (75 g/m2 – 90 g/m2) can be set on the multi-bypass tray. Paper sizes between 5 1/2" x 8 1/2",

8 1/2" x 5 1/2", 8 1/2" x 11, 11" x 8 1/2", 8 1/2" x 14, 11" x 17" and

12" x 18" [B6R, A5R, B5R, B5, A4R, A4, B4, A3, A3 wide (305 mm x 457 mm) and Folio] can be used. When copying onto special paper, be sure to use the multi-bypass tray.

NOTE

The following types of special paper and the number of sheets that can be set on the multi-bypass tray at one time are as follows: OHP transparencies: 25 sheets (BE SURE to use only 11" x 8 1/2" [A4] size OHP transparencies and ALWAYS fan through transparencies before setting them on the multi-bypass tray.) Thick paper (91 g/m2 – 220 g/m2): 50 sheets

The acceptable paper weight for thick paper actually differs depending upon the size of the paper:

Under 11" x 8 1/2" [A4]: 91g/m2 – 220 g/m2

Over 11" x 8 1/2" [A4]: 91g/m2 – 135 g/m2

IMPORTANT!

BE SURE to use paper that is specified for color copy use in order to make clear color copies.

DO NOT use paper such as that designated for inkjet printers or any paper treated with special coating.

When setting special paper such as OHP transparencies and thick paper on the multi-bypass tray, be sure to specify the type of paper under “When setting OHP transparencies or thick paper on the multi-bypass tray” on page 3-5.

NOTE

When copying onto 8 1/2" x 11" [A4R] size paper or larger, be sure to pull out the multi-bypass extension.

 

Adjust the insert guides to fit the width of the paper that is to

2

be set on the multi-bypass tray.

 

 

 

 

 

 

 

 

 

3-3

Page 25
Image 25
Kyocera KM-C830D manual Setting paper on the multi-bypass tray