Kyocera KM-C830D manual Separation insert mode, Types of copy Copy onto Leave both, Front only

Section 6 FUNCTIONS

●Separation insert mode

With this mode, sheets can be inserted at specified points among copies of multiple originals. You can also select whether to copy onto the inserted sheets themselves or not.

NOTES

•The drawer which contains the paper that to be fed as insert sheets must be designated in advance. (See “* Insert tray” on

page 7-21.)

•If “Bypass” is selected under “* Insert tray” on page 7-21, it will not be possible to make 2-sided copies of the separation inserts.

•The available settings for this mode will differ depending upon the type of originals being copied and the type of finished copies that are being made.

A circle (“￿”) in the following table indicates that the setting is possible.

Types of copy		Copy onto	Copy on	Leave both
	settings	front and	front only	front and
	available	back		back blank
Original/
Copy type
1-sided	1-sided		￿	￿
originals	copies
	2-sided	￿	￿	￿
	copies
2-sided	1-sided		￿	￿
originals	copies
	2-sided	￿	￿	￿
	copies

1If you choose to copy on the front and back side of the insert

sheets…

* The illustration shows the result when 2-sided copies are made.

2If you choose to copy on the front side of the insert sheets only… * The illustration shows the result when 2-sided copies are made.

3If you choose to leave both the front and back side of the insert

sheets blank…

* The illustration shows the result when 2-sided copies are made.

6-27