Section 6 FUNCTIONS
| Use the M cursor or the N cursor key to specify the type of |
| Press the Start key. Scanning of the original will start. | |
4 | originals being copied. | 9 | • If you set the originals in the optional DF, copying will start | |
|
| |||
| Select “z |
| automatically. |
|
| “x |
| • If you set the original on the platen, go to the next step. | |
| Inch specifications |
| Inch specifications | Metric specifications |
Metric specifications
5
6
7
8
Press the Enter key.
Use the M cursor or the N cursor key to select the binding direction for the finished copies.
Inch specifications
Metric specifications
Press the Enter key. The
Set the original to be copied.
|
| Replace the first original with the next one and press the | ||||||
10 | Start key. Scanning of that next original will start. | |||||||
|
| |||||||
|
| Carry out this step for all of the originals that you want to | ||||||
|
| copy and, once you have finished scanning them all, press | ||||||
|
| the Enter key. Copying will start. |
|
| ||||
|
|
| Inch specifications | Metric specifications | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTES
•When setting the originals on the platen, be sure to set them in order from the first page first.
•If necessary, select the location of paper feed.
