Section 7 COPIER MANAGEMENT
&Custom erase size
1Press the O cursor or the P cursor key to select the length of the original to be used in the custom erase mode.
(The length can be set to any 5/16" increment between
3 11/16" and 8 7/16" [any 8 mm increment between 94 mm and 214 mm.])
Inch specifications
Metric specifications
2 | Press the N cursor key to change to the width size setting. |
| Press the O cursor or the P cursor key to select the paper |
3 | width. (The length can be set to any 1/8" increment between |
|
2 3/8" and 11 5/8" [any 4 mm increment between 60 mm and 296 mm.])
Inch specifications
Metric specifications
4 Press the Enter key.
*Insert tray
1Use the M cursor or the N cursor key to select the drawer that contains the paper which will be fed in the insert sheet
modes.
*The “1 paper” [“SOURCE 1”] drawer is not available in duplex copiers.
Inch specifications
Metric specifications
2 Press the Enter key.
(Sort mode ON/OFF (Output form)
1Use the M cursor or the N cursor key to select either “z On” or “x Off”.
Inch specifications
Metric specifications
2 Press the Enter key.
