Section 6 FUNCTIONS
6-8
11 Replace the first original with the next one and press the
Start key. Scanning of that next original will start.
Carry out this step for all of the originals that you want to
copy and, once you have finished scanning them all, press
the Enter key. Copying will start.
6Select whether you want the image that is copied onto the
back side of the copy to be rotated 180 degrees or not.
Inch specifications
Metric specifications
7Press the Enter key
The 2-sided mode [DUPLEX MODE] screen will appear.
Go directly to step 10.
8Use the M cursor or the N cursor key to specify the binding
direction of the original being copied.
Inch specifications
Metric specifications
9Press the Enter key.
The 2-sided mode [DUPLEX MODE] screen will appear.
10 Press the Start key. Scanning of the original will start.
If you set the originals in the optional DF, copying will start
automatically.
If you set the original on the platen, go to the next step.
Inch specifications Metric specifications
Inch specifications Metric specifications