Section 3 PREPARATIONS
3. Cleaning the charger
Perform the following cleaning operation on the charger if black lines appear on the copy image.
1 Open the front cover.
2 | Grasp the green cleaning shaft (shown as 1 in the |
illustration), pull it out slowly as far as it will go and then push |
it back in all the way. Repeat this step 3 to 5 times.
1 |
3 | Take the supplied grid cleaner out of its package and remove |
the cap. |
NOTE
The sponge portion of the grid cleaner contains fluid. Perform the cleaning operation as quickly as possible to prevent it from drying out.
4 |
| With the sponge portion of the grid cleaner up, attach it to the | ||
| copier as shown in the illustration. | |||
| ||||
|
|
|
| |
|
|
|
| |
5 | Push up on the main charger release lever (shown as 2 in |
the illustration). Lift up slightly on the main charger (shown | |
| as 3 in the illustration), slowly pull out the main charger as |
| far as it will go and then push it back in all the way. Repeat |
| this step 2 to 3 times. |
| 2 |
| 3 |
6 | Lift up on the main charger release lever and push the main |
charger back into its original position in the copier. |
