Kyocera KM-C830D manual Reference

Section 7 COPIER MANAGEMENT

Default setting	Description	Available settings	Factory setting	Reference
				page
5 APS for special	Sets whether the paper loaded in the drawer that	On / Off	On	7-29
paper ON/OFF	was selected under “4 Special paper location” on
	page 7-28 will be used or not in the auto paper
	selection mode or in automatic drawer switching
	(page 2-5).
6 Color copy paper	Sets the location (a drawer or the multi-bypass tray)	Standard copiers	-----	7-29
location	where paper will be loaded for color copying. When	Bypass /
	you make color copies in the auto paper selection	1 paper [SOURCE 1] –
	mode, copying will be performed onto paper that is	4 paper [SOURCE 4]
	loaded in the drawer that you select here.
	* No.3 and No.4 drawers can only be selected	Duplex copiers
	when the optional Paper Feeder is installed in	Bypass /
	your copier.	2 paper [SOURCE 2] –
		4 paper [SOURCE 4]
7 Auto preheat time	Sets the amount of time between the point that	5 minutes – 45 minutes	15 minutes	7-29
	copying ends and the energy-saving preheat mode	(5 minute increments)
	(page 6-47) engages.
8 Auto shut-off time	Sets the amount of time that will elapse if no	15 minutes – 240	30 minutes	7-29
	operation is performed before the auto shut-off	minutes (15 minute
	function (page 6-48) engages and turns the copier	increments)
	OFF ( ). It is also possible to disable the auto
	shut-off function. If the auto shut-off function is
	turned OFF, this setting will not be effective. (See
	“3 Auto shut-off ON/OFF” on page 7-28.)
	The factory default time is 30 minutes.
	* It is recommended that you try to set a longer time
	interval before auto shut-off engages if you use
	the copier frequently, and to a shorter time if it is
	used less frequently.
	* In order to disable the auto shut-off function, see
	“3 Auto shut-off ON/OFF” on page 7-28.

9Display contrast adjustment

Adjusts the contrast of the LCD display if you cannot see the message display clearly.

1 – 7

4 (middle setting)

7-30

7-25