Section 6 FUNCTIONS
11. Preparing presentation materials to go with transparencies
[Presentation mode]
Multiple copies of the original image can be made onto standard copy paper while the transparency + backing sheet mode (see page
NOTES
•If your machine is a duplex copier, it is possible for you to make duplex
•If you do not have a Memory Copy Board installed as standard equipment, the optional Memory Copy Board must be installed in your copier in order to use this mode.
(1) Copying onto the backing sheet
With this setting, after the original is copied onto the transparency and the same image copied onto the backing sheet (see “(1) Copying onto the backing sheet” on page
(The asterisk “∗” in the illustration indicates the transparencies.)
|
| Set the transparency film in the | |
1 |
| the transparency mode. | |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
NOTES
•Fan through the transparencies before setting them.
•Up to 25 transparencies can be set on the
•Make sure that paper of the same size as the transparencies has been loaded into a drawer.
(2) Leaving the backing sheet blank
With this setting, after the original is copied onto the transparency but the backing sheet left blank (see “(2) Leaving the backing sheet blank” on page
2
3
4
Set the originals to be copied.
Press the Transparency Film / Card Stock key to light the corresponding indicator.
Inch specifications |
| Metric specifications | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use the M cursor or the N cursor key to select
“z Transparency Mode” and then press the Enter key. The “Select function” screen will appear.
Inch specifications
Metric specifications