Section 6 FUNCTIONS
11 | Press the Enter key. Perform the procedure below that |
corresponds to the mode that you selected. |
• If you selected “z Cover” or “c Cover+Insert” here, go to the next step (“● Cover mode settings”).
• If you selected “x Insert” here, go directly to step 21 (“● Separation insert mode settings”).
NOTE
If you selected both modes “c Cover+Insert”, the screen for the cover mode will be displayed first.
●Cover mode settings
12 Set the paper that you want to use as the covers in the
13 | The currently selected cover mode settings will be displayed. |
• If you want to change any of the settings, use the M cursor |
or the N key and select either “Front” or “Back”.
• If you want to copy with the currently selected settings, go directly to step 19.
Inch specifications
Metric specifications
14 Press the Enter key.
•If you selected “Front”, go to the next step.
•If you selected “Back”, go directly to step 17.
15
16
17
18
Use the M cursor or the N cursor key to select whether you want to copy onto the front cover or not.
If you DO want to copy onto the front cover, select “Frt copy” [“COPIED”]. Otherwise, select “Blank”.
Inch specifications
Metric specifications
Press the Enter key.
•If you are finished changing the cover mode settings, go to step 19.
•If you want to change the settings for the back cover as well, use the N cursor key to select “Back”, and then press the Enter key.
Use the M cursor or the N cursor key to select whether you want to copy onto the back cover or not.
If you DO want to copy onto the back cover, select “Frt copy” [“COPIED”]. Otherwise, select “Blank”.
*If you do not want to have a back cover included at all, select “No”.
Inch specifications
Metric specifications
Press the Enter key.
