Section 3 PREPARATIONS

Setting the envelopes on the multi-bypass tray

Perform the following procedure and set the envelopes on the multi-bypass tray.

1 Open the multi-bypass tray.

2

3

Adjust the insert guides to fit the width of the envelopes that are to be set on the multi-bypass tray.

Keeping the flap closed, situate envelopes with the print side face-up and the flap side towards the front of the copier or towards the leading edge of insertion. Then slide them all the way into the multi-bypass tray, along the insert guides, as far as they will go.

*The proper orientation will actually depending upon the type of envelope being used.

*DO NOT set the flap towards the trailing edge of insertion as there is a danger of it jamming.

Copier

Copier

Copier

3-7

Page 29
Image 29
Kyocera KM-C830D manual Setting the envelopes on the multi-bypass tray, Copier