Section 7 COPIER MANAGEMENT
7 |
| Press the Enter key. |
|
| |||
|
| Use the numeric keys on the keypad to enter the new copy | |||||
8 | |||||||
| limit for that department code. |
|
| ||||
|
|
| |||||
|
| The copy limit can be set to any 1 page increment between | |||||
|
| 1 and 999,999. |
|
| |||
|
| Inch specifications |
| Metric specifications | |||
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
NOTE
Enter “0” if you want to enable unlimited copying under that department code.
9 | Press the Enter key. |
The display will return to the screen in step 6. |
NOTE
If you want to change the copy limit for another department code, repeat steps 6 through 9.
| Press the Stop/Clear key. | |
10 | The message display will return to the screen in step 4. | |
| ||
| Use the M cursor key to select “z End” and then press the | |
11 | ||
Enter key. | ||
|
The message display will return to the screen in step 2. Inch specifications
Metric specifications
12 Use the M cursor key to select “z End” once again and then press the Enter key.
The message display will return to the “Ready to copy.” screen.
Inch specifications
Metric specifications
●Clearing copy counts
1 | Display the “Copy Management” screen. (See page |
| Use the M cursor or the N cursor key to select |
2 | “x Management Setting” [“x COPY MGMT SETTING”]. |
|
Inch specifications
Metric specifications
3 | Press the Enter key. | |
4 | Use the M cursor or the N cursor key to select “b Delete | |
Count” [“b COUNTS CLEAR”]. | ||
|
Inch specifications
Metric specifications
5 Press the Enter key.
