Section 8 OPTIONAL EQUIPMENT
8-4

(4) Memory Copy Board

The Memory Copy Board is required in order to use the following
modes and functions of your copier.
Margin mode
Border erase modes
Print page numbers mode
Transparency + backing sheet mode
Presentation mode
Insert sheet modes
Layout modes
BW/Selection mode
Poster mode
Filing mode
Sort mode
Rotate copy function
Copy management function
* The Memory Copy Board is standard in duplex copiers.

(5) Casters

These casters are for attaching to the bottom of your copier.

(2) Paper Feeder

This paper storage unit has two 250-sheet capacity drawers similar to
those included as standard equipment with your copier.
Paper capacity (each drawer)
250 sheets (standard copy paper of a paper weight between 75 g/m2
and 90 g/m2)
Acceptable sizes of paper
8 1/2 x 11", 11" x 8 1/2, 8 1/2" x 14" and 11" x 17" [A5R, B5R, A4R, A4,
B4 and A3]
Paper is loaded in these drawers the same manner as with the
included drawers. (See page 3-1.)
* An access cover is included on the right side of the unit just in case
paper jams in either of these drawers.
* To prevent the copier from tipping over because of weight in the
copier and the upper paper drawers, the caster kit must be installed
at the bottom-most paper feeder, when an optional paper feeder is
installed with the copier.

(3) Document Finisher

The Document Finisher stores a large quantity of copies and can sort
multiple copy sets by shifting their position of ejection. it can also
staple the copy sets as well. For more details, refer to the Operation
Guide for the Document Finisher.
CAUTION

To prevent the possibility of accidents due to tilting

the copier body, always turn the desks stopper bolts

until they make firm contact with the floor during

initial installation or whenever the machine is moved.

CAUTION

To prevent the copier from tipping over, the optional

caster kit must be installed when the copier is

installed with an optional paper feeder.