Section 6 FUNCTIONS
19. Memorizing frequently used settings [Program function]
Up to seven combinations of copy modes and other functions displayed on the operation panel can be registered as a single program using this function.
(1)Registering a program
1Set the desired copy modes, etc., to be registered on the operation panel and return to the “Ready to copy.” screen.
2Press the */Language key.
The “Default mode setting” [“SELECT SET ITEM”] screen will appear.
Inch specifications | Metric specifications |
4 | Use the M cursor or the N cursor key to select the program |
number under which you want to register the settings. |
The program number can also be entered directly using the numeric keys on the keypad.
Inch specifications
Metric specifications
NOTE
Pressing the P cursor key will display details of each setting. When a program contains many settings, continue to press the P cursor key in order to confirm the other settings. Press the O cursor key to return to the previous screen.
5 | Press the Enter key. |
The message display will return to the “Ready to copy.” |
screen.
Copying is now possible using the settings that were registered under that program.
Inch specifications | Metric specifications |
3 | Use the M cursor or the N cursor key to select “x Store |
Program” [“x PROGRAM REGISTRATION”] and then press |
the Enter key. Inch specifications
Metric specifications
