Section 6 FUNCTIONS
5. Making a margin space for binding [Margin mode]
NOTE
If you do not have a Memory Copy Board installed as standard equipment, the optional Memory Copy Board must be installed in your copier in order to use this mode.
(1) Left margin
The image of the original is shifted to the right to make a margin (blank space) for binding on the left side of the paper.
NOTES
•The margin width can be set to any 1/8" increment between 1/4" and 3/4" [1 mm increment between 6 mm and 18 mm].
•It is also possible for you to select the default setting for the margin width from among the range indicated above. (See “% Margin width” on page
•If you select to have a left margin created during
(2) Top margin
The image of the original is shifted downward to make a margin for binding on the top side of the paper.
(3) Front & back margin
When you are making
NOTES |
•The margin widths can be set to any 1/8" increment between 1/4" and 3/4" [1 mm increment between 1 mm and 18 mm].
•The margin position that can be selected for the back side will differ depending upon the margin position that is selected for the front side. A circle (“”) in the following table indicates that the setting is possible.
Front side | “Left | “Right | “Top | “Bottom | “No | |
Rear side | Margin” | Margin” | Margin” | Margin” | Margin” | |
|
|
|
|
| ||
“Left |
|
| ||||
Margin” |
|
| ||||
|
|
|
|
| ||
|
|
|
|
|
| |
“Right |
|
| ||||
Margin” |
|
| ||||
|
|
|
|
| ||
|
|
|
|
|
| |
“Top |
|
| ||||
Margin” |
|
| ||||
|
|
|
|
| ||
|
|
|
|
|
| |
“Bottom |
|
| ||||
Margin” |
|
| ||||
|
|
|
|
| ||
|
|
|
|
|
| |
“No | ||||||
Margin” | ||||||
|
|
|
|
| ||
|
|
|
|
|
| |
|
|
|
|
|
|
NOTES
•The margin width can be set to any 1/8" increment between 1/4" and 3/4" [1 mm increment between 6 mm and 18 mm].
•It is also possible for you to select the default setting for the margin width from among the range indicated above. (See “% Margin width” on page
