Kyocera KM-C830D manual Performing copy management procedures, Registering new department codes

Section 7 COPIER MANAGEMENT

(3)Performing copy management procedures

●Registering new department codes

1	Display the “Copy Management” screen. (See page 7-3.)
	Use the M cursor or the N cursor key to select
2	“x Management Setting” [“x COPY MGMT SETTING”].

Inch specifications

Metric specifications

3	Press the Enter key.
4	Use the M cursor or the N cursor key to select “x Register”.
	Inch specifications

Metric specifications

5	Press the Enter key.
6	Use the numeric keys on the keypad to enter the department
	code that you want to register.

Inch specifications

Metric specifications

7	Use the N cursor key to highlight the maximum number of
	copies.

Inch specifications

Metric specifications

	Use the numeric keys on the keypad to enter the maximum
8	number of copies that can be made under that department
	code. The copy limit can be set to any 1 page increment
	between 1 and 999,999.
		Inch specifications	Metric specifications

NOTES

•Enter “0” if you want to enable unlimited copying under that department code.

•Press the Stop/Clear key if you want to clear the registered department code and enter a new code.

9	Press the Enter key.
	The message display will return to the screen in step 6.

NOTE

If you want to register another department code, repeat steps 6 through 8.

10 Press the Stop/Clear key.

The message display will return to the screen in step 4.

7-4