Kyocera KM-C830D manual Erase mode that you want to use

Section 6 FUNCTIONS

	Press the Digital Editing key to light the corresponding
2	indicator.
	Inch specifications	Metric specifications

3	Use the M cursor or the N cursor key to select “c Border
	Erase” and then press the Enter key.

The “Select Erase effect” screen will appear.

Inch specifications

Metric specifications

4	Use the M cursor or the N cursor key to select the border
	erase mode that you want to use.

Inch specifications

Metric specifications

5	Press the Enter key.
	• If you selected “z Sheet Erase” or “x Book Erase”, go to

the next step.

• If you selected “c Custom Sheet”, go directly to step 8.

NOTE

In order to use the “c Custom Sheet” setting, the size of the original that is being copied must be registered in advance. (See “& Custom erase size” on page 7-21.)

6	Use the M cursor or the N cursor key to select the width of
	the border that you want to have erased.

Inch specifications

Metric specifications

NOTES

•The width of the border to be erased can be set to either 1/4", 1/2" or 3/4" [6 mm, 12 mm or 18 mm].

•The arrow (>) indicates the current setting.

7	Press the Enter key.
	Use the M cursor key to select “z Enter” and then press the
8
	Enter key. The message display will return to the “Ready to

copy.” screen.

6-16