Kyocera KM-C830D manual APS for special paper ON/OFF, Color copy paper location, Auto preheat time

Section 7 COPIER MANAGEMENT

5APS for special paper ON/OFF

1Use the M cursor or the N cursor key to select either “z On” or “x Off”.

Inch specifications

Metric specifications

2 Press the Enter key.

6Color copy paper location

1Use the M cursor or the N cursor key to select the location (a drawer or the multi-bypass tray) where paper will be

loaded for color copying.

*The “1 paper” [“SOURCE 1”] drawer is not available in duplex copiers.

Inch specifications

Metric specifications

2	Press the P cursor key. An asterisk ( ) will appear next to
	the selected location.

If you want to cancel the designation, press the O cursor key and the asterisk will be deleted.

Inch specifications

Metric specifications

3	Use the M cursor or the N cursor key to select “End” and
	then press the Enter key.

7Auto preheat time

1Use the M cursor or the N cursor key to select the amount of time before the preheat mode engages. (The time can be

set to any 5 minute increment between 5 minutes and 45 minutes.)

Inch specifications

Metric specifications

2 Press the Enter key.

8Auto shut-off time

1Use the M cursor or the N cursor key to select the amount of time before the auto shut-off function engages. (The time

can be set to any 15 minute increment between 15 minutes and 240 minutes.)

Inch specifications

Metric specifications

2 Press the Enter key.

7-29